1、The radiator should not be in contact with any acid, alkali or other corrosive properties.

2、It is recommended to use soft water, hard water should be softened and used to avoid blockage and scale inside the radiator.

3, the use of antifreeze, in order to avoid corrosion of radiators, please be sure to use regular manufacturers and meet the national standards of long-lasting anti-rust antifreeze.

4、In the process of installing the radiator, please do not damage the radiator tape (piece) and touch the radiator to ensure the heat dissipation capacity and sealing.

5、When the radiator is completely drained and then filled with water, the water release switch of the engine block should be twisted open first, and when water flows out, it should be closed again so as to avoid blisters.

6, in daily use should always check the water level, to stop cooling after adding water. When adding water, the water tank cover slowly open, the operator's body should be as far away as possible from the water spout to prevent high-pressure steam from the water spout caused by scalding.

7, in winter to prevent icing caused by the core rupture phenomenon, such as long-term parking or indirect parking, the water tank cover and water release switch should be released all the water.

8, the spare radiator effective environment should be kept ventilated and dry.

9, depending on the actual situation users should be in 1 to 3 months between the radiator to completely clean the core once. When cleaning, use water to flush along the side of the anti-inlet wind.

10、The water level meter should be cleaned once every 3 months or depending on the actual situation, each part is removed and cleaned with warm water plus non-corrosive detergent.